VacPak-It 186VMC16F, Руководство по обслуживанию

Страница: 8 / 27

8
Troubleshooting
PROBLEM POSSIBLE SOLUTION PAGE
Bags are not sealing
Adjust sealing time cycle 5
Ensure pouches are laying flat on sealing bars 6
Ensure sealing bars are clean 7
Ensure pouch has no wrinkles 6
Check sealing foam 11
Check solenoid valve 19
Check piston 14
Check circuit board 18
Unit is making an extra
loud noise when running
Check pump site gauge fluid level 4
Check lid sealing gasket 11
Check vacuum silicone tubes
Check pump
15
Bags are not being fully
vacuumed
Check pump site gauge fluid level 4
Adjust vacuum cycle time 5
Check lid 11
Check lid sealing gasket 11
Check voltage is getting to the pump 15
Check solenoid valve 19
Check main circuit board 18
Front circuit board does
not come on
Ensure correct power is supplied
Ensure unit is plugged in
Check to see if fuse is blown
10
Check switch for voltage and function 15
Check front circuit board 13
E01 error is showing
Ensure lid was held down to start 6
Check lid 11
Check lid sealing gasket 11
Check microswitch 17
Vacuum cycle does not
start
Ensure unit is plugged in and turned on
Ensure lid is closed
4
Adjust vacuum cycle time 5
Ensure cycle time setup has been exited 5
Check microswitch 17
Check main circuit board 18