VacPak-It 186VMC16F, Руководство по обслуживанию

Страница: 11 / 27

11
Lid: Visually inspect for cracks or damage
Time Estimate: Approximately 30 minutes
Part: #186PLID16F (186VMC16F ONLY)
#186PLID20F(186VMC20F ONLY)
#186PLID20FGF1 (186VMC20FGF ONLY)
1. Follow pre-maintenance steps from page 10
2. Remove 4 Phillips screws from each hinge plate at the
rear of the lid and hold the lid to ensure it does not fall
(Fig. 11)
Sealing Foam: Visually inspect for cuts or missing sec-
tions, replace if any are found
3. Remove sealing foam from lid by pulling it out of the
mount channel on the lid (Fig. 12)
Part: #186PSEALPAD2 (186VMC16F ONLY)
#186P20FTOPBA (186VMC20F & 186VMC20FGF)
4. Remove sealing foam mount channel by removing 1
Phillips head screw from the middle of the mount (Fig. 13)
Lid Sealing Gasket: Visually inspect cracks or damage,
replace if any are found
5. Remove lid sealing gasket by lifting it out of the
groove in the lid (Fig. 14)
Part: #186PGASKET4
6. Installation of new lid is reverse of removal steps
Lid parts
Fig. 11
Fig. 13
Part Replacement Continued
Fig. 12
Fig. 14