VacPak-It 186VMC16F, Руководство по обслуживанию

Страница: 5 / 27

5
Note: All adjustments must be made with the lid open
1. Turn the power knob to the "ON" position
2. Press the "SET" button on the front control panel to enter the setup mode and move through
the different cycles (Fig. 4 - A)
3. Each cycle light will light a solid blue color and show the current duration of the cycle in
seconds
4. Use the "UP" or "DOWN" arrow buttons to adjust as needed (Fig. 4 - B)
Note: Vacuum Cycle is adjustable from 0 - 90 seconds (5 second intervals)
Gas Cycle is adjustable from 0 - 10 seconds (0.5 second intervals)
Sealing Cycle is adjustable from 0 - 6 seconds (0.5 second intervals)
Cooling Cycle is adjustable from 0 - 10 seconds (0.5 second intervals)
5. After setting all the cycle times, press the "SET" button again to exit the setup mode
(Fig. 4 - A)
6. Ensure no cycle lights are on as machine will not operate if any cycle lights are on
Fig. 4
A
B
Adjusting Cycle Times