Utilicor minicor-3 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 44

background image

© 2018 Utilicor Technologies Inc.

minicor-3 V1.5

8

Do not allow children to operate this machine.

Know your controls and how to stop the power unit and engine quickly in an
emergency.

READ THIS MANUAL AND THE ONE PROVIDED WITH YOUR POWER
UNIT.

Protective glasses must be worn while you operate the prime mover and
while you operate the minicor-3.

While you operate the minicor-3, check for proper operation of all controls
and all protective devices. Note any needed repairs during operation of the
minicor-3. Report any needed repairs.

Always stop the power unit, set brake, shut off the engine, remove the
ignition key, lower implement to the ground before dismounting. Never leave
equipment unattended with the power unit running.

Never place hands or feet under minicor-3 with power unit engine running or
before you are sure all motion has stopped. Stay clear of all moving parts.
Keep hands, feet, hair, and clothing away from moving parts.

Do not reach or place yourself under equipment until it is blocked securely.

Take all possible precautions when leaving unit unattended: Disengage
hydraulic power, set parking brake, stop engine and remove key from
ignition.

Park in level area.

Do not allow riders on the minicor-3 or power unit at any time. There is no
safe place for any riders.

Disengage hydraulic power and place transmission into neutral before
attempting to start engine.

Always use two people to handle heavy, unwieldy components during
assembly, installation, removal, or moving the attachment.

«
...
7
8
9
10
11
...
»

Содержание minicor-3













































Отзывы:

Нет отзывов

Похожие инструкции для minicor-3

Бренд: iGuzzini Страницы: 20

Бренд: Labnet Страницы: 5

Бренд: TAIKO Audio Страницы: 24

Бренд: Parker Страницы: 5

Бренд: Bacharach Страницы: 31

Бренд: Bacharach Страницы: 2

Бренд: LAWO Страницы: 459

Бренд: earline Страницы: 13

Бренд: Datalogic Страницы: 20

Бренд: Datalogic Страницы: 188

Бренд: XM Fitness Страницы: 10

Бренд: RayLight Страницы: 34

GAZELLE FREESTYLE

Бренд: Gazelle Страницы: 10

Бренд: Latham Страницы: 19

Бренд: Laser Страницы: 2

Бренд: Lars Thrane Страницы: 50

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Zennio Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды