© 2018 Utilicor Technologies Inc.
minicor-3 V1.5
10
TRANSPORT SAFETY
Comply with state and local laws governing highway safety and movement of
machinery on public roads.
The use of flashing amber lights is acceptable in most localities.
However, some localities prohibit their use. Local laws should be checked for
all highway lighting and marking requirements.
When driving the power unit and equipment on the road or highway under 20
mph (32 kph) at night or during the day, use flashing amber warning lights
and a slow-moving vehicle (SMV) identification emblem.
Always be sure the implement is in the proper raised position for transport.
Plan your route to avoid heavy traffic.
Do not drink and drive!
Watch for traffic when operating near or crossing roadways.
Reduce speed when transporting mounted implements to avoid bouncing and
momentary loss of steering control.
Turn curves or go up or down hills only at a low speed and at a gradual
steering angle. Make certain that at least 20% of the prime mover’s weight is
on the front wheels to maintain safe steerage. Slow down on rough or uneven
surfaces, and loose gravel.
Use extreme care and maintain minimum ground speed when transporting on
hillside. Be careful when turning sharp corners.
Never allow riders on either power unit or minicor-3. Falling off can kill.
Be a safe and courteous driver. Always yield to oncoming traffic in all
situations, including narrow bridges, intersections, etc.
Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces.
