manualshive.com logo in svg

UTIFORM Convey 260, Инструкция по эксплуатации, Страница: 6 / 85

Поделиться
Скачать
UTIFORM Convey 260 Скачать руководство пользователя страница 6

Electric Soladora CONVEY 260 

www.utiform.com

  

departamento.té[email protected]    

 

Tfno. + 34 96 570 29 82 fax:  + 34 96 570 29 83 

 

5 

 

2.4 

 

Devices of Protection 

 

Before starting the machine they have to be placed all the protection facilities and they have to be 

prepared to work. The grills protectors are a fixed safety appliance that you/they can never be retired in 
operation. The machine CONVEY 260 complete all the requirements of the safe-deposit European norms for 
construction machines.  
 

Never to play through the safe-

deposit grills!

 

 
 

2.5 

 

Safety measures in the normal operation 

 

Only to start the machine in case all the protection devices work completely. To make sure before to 

plug it that no person is in danger.  

 
To check at least once up-to-date, in the machine and all their complements, as the tubes transporters 

and automatic tripod of exit if external damages existed and if they work the protection devices perfectly.  

 
Mainly, to keep in mind in the tubes transporters breaks, bumps or damages in the material.  
 
To keep in mind the waste, correct function, you prow or possible indications of damages in the tubes 

transporters, or at least every 3 months all the tubes transporters and connection joining should be changed 
among the same ones.

  

 
 

2.6 

 

Revision and maintenance, suppression of mishaps  
 

•

 

To carry out the adjusting works, maintenance and inspection settled down inside the certain term. 

Flexible rubber tubes with their joinings are subjected to a natural process of waste for close contact and 
aging. To check for a specialist (at most every 3 months) the good state and to change them, when 
necessary. To write down the process in the control leaf dedicated for this end.

 

 

•

 

In all the maintenance works, inspection and repair is to make sure that the machine is free of electric 

tension and mainly that is not connected pressing the disconnect switch unwittingly again. 

 

 

•

 

To place a warning warning so that to avoid that an involuntary connection takes place. 

 

 

•

 

To control helical combinations loosed in an adjustment. To check the functions and protection 

devices after finishing the maintenance works. 

 

 
 

2.7 

Mechanical changes in the machine  

 

NOT to carry out, without previous authorization of the maker, any installation change or it reforms in 

the machine. That is also applicable for the soloed in supportive pieces. All the reformations specify an 
authorization in writing of the maker, 

UTIFORM. 

Содержание Convey 260






















































































Отзывы:

Нет отзывов