UTIFORM Convey 260, Инструкция по эксплуатации, Страница: 27 / 85

Electric Soladora CONVEY 260
www.utiform.com departamento.técnico@utiform.com Tfno. + 34 96 570 29 82 fax: + 34 96 570 29 83
26
7.9.1 Description of the Product:
The feeding must be carried out through a given transformer of fifty watts and that it accompanies the
apparatus. This transformer should feed to 400 V and it transforms the tension to 12 V. of AC.
The apparatus should not work to a superior tension to the 16 V. of AC.
This apparatus cannot work with direct current. It must work with twelve volts of AC (VCA). He/she
takes like base of time the signs coming from the electric net.
This temporized of it greases it can accompany with the receiving "UTIFORM" to control the
manoeuvred of the electro hydraulic valve, which receives the sign of the control distances located in the
haulage shovel.
It includes a system of quick load in four hours for the batteries of the issuing team, and a control circuit
for emergency cable.
Connections: 1
a) Feeding Regret: It is where we should connect the
secondary of the transformer. The primary one
should be connected to the tension of net of
400VAC.
b) Connection to the connector of four poles: He/She
has the I number from each pole to which should be
connected the batteries of the command control like
the auxiliary cable since so much they should be
connected to this peg.
c) Connection to the relé of the receiver: It should be
connected to the dry contact and usually open of the
receiver. When closing this contact he/she carries out
the feeding of the electro valve
d) Auxiliary Exit of 12VCC: Rectified exit of not
regulated tension. The apparatus feeds with 12 V. of
AC, and in these terminals we can connect an
auxiliary element that doesn't consummate more than
an ampere, I eat a receiver of 12VCC for example.
e) Connection of the electro valve: Here we should
connect the electro valve of 12 V. of direct current.
f) Connection to the motor of it Greases: Here we
should connect the motor of it greases. As the exit it
is from direct current to 12 V, it can be that the motor
walks on the contrary to the correct one. In such a
case, the polarity should be invested exchanging the
cables of the motor.
The motor of it greases he/she has a soft outburst to
lengthen the life of the motor; this he/she should not
have a upper consumption to the 3 A. The operation of the motor can be interrupted by an order of march of the
electro valve. If it happened this simultaneously to the operation of the motor, this is disconnected while it is
connected the electro-valve, working the pending time again.