UTIFORM Convey 260, Инструкция по эксплуатации, Страница: 14 / 85

Electric Soladora CONVEY 260
www.utiform.com departamento.técnico@utiform.com Tfno. + 34 96 570 29 82 fax: + 34 96 570 29 83
13
If a traction vehicle is used that prepares of a system of 12 V, you can connect the cable immediately
with the vehicle.
If one has a traction vehicle with a system of 24 V, he/she is necessary an adapter of 12 V to 24 V
(consults us the reference of the article)
If he/she behaves a vehicle with plug-in EURO, he/she is necessary an adapter of 12 V to EURO
(consults us the reference of the article)
3.5
Preparation to carry out the transport
•
To empty the mixture boiler completely.
•
To control the pressure of the tires.
•
To regulate the height of the hook head.
•
To loose the parking control.
•
To hook the tow in the traction vehicle.
•
To run off with up the wheel jockey and then to bend it.
•
To hold the safe-deposit cable of control.
•
To revise the blockade of the cover, the closings and the valve of the square of controls.
•
Close you the locks, this is a protection against vandalism and robbery.
•
For the transport the machine has by lorry to have a bar of illumination that works.
3.6 Transport like tow
To carry out the transport by lorry it is necessary to keep in mind the following points:
•
To respect the domestic national traffic norms where you circulates with the tow.
•
To take gets the documentation or permission of circulation of the tow.
3.7 Transport in a truck
To only use a vehicle of transport with enough carrying capacity for the total weight of the machine.
Immediately after loading the machine to assure it and to hold it in such a way that cannot come off. To
use for it adapted tapes, the chucks located in the front part of the machine and to work the parking control,
according to machine version.
To assure all the pieces that can move, as the cover of the boiler and the tubes transporters.
The transport of the machine in a truck without belts is not admitted.
Not to forget before the next transport to remove the insurance of transport in the machine.