manualshive.com logo in svg

UTIFORM Convey 260, Инструкция по эксплуатации, Страница: 31 / 85

Поделиться
Скачать
UTIFORM Convey 260 Скачать руководство пользователя страница 31

Electric Soladora CONVEY 260 

www.utiform.com

  

departamento.té[email protected]    

 

Tfno. + 34 96 570 29 82 fax:  + 34 96 570 29 83 

 

30 

 
 

Causes of the formation of plugs 
 

The plugs can be formed for different reasons, for example:  

1. 

 

Supplementary material with a low percentage of thick grain in the mixture ingredients:  little 

tendency to the formation of plugs offers the use of supplementary material of the line of regular sieve  

2. 

 

Hoses of transport with a small nominal diameter:  it should only be used hoses of transport with a 

nominal diameter of 60 or 65 mm.  

3. 

 

A high percentage of agglutinant in the mixture ingredients:  the hoses should also here be used with 

a bigger nominal diameter, starting from a nominal diameter of 60 mm.  
At the same time, thick sand should be used with a bigger percentage of thick grain. 
 

If it reaches some material the eyes in spite of taking some goggles, to wash the eyes immediately with 

abundant cold water. 

The hydraulic agglomerate is aggressive and it can damage the eyes.

 

 

Then to go to a specialist immediately.

 

 
 

7.12 

Operations in winter 

 

In geographical areas with low temperatures the work is more difficult. 
 
To take advantage of that time, if it is possible, for maintenance works and repairs in the machine. To 

make the annual revision in an authorized shop.  
 

Up to 0 ºC it is guaranteed an operation without difficulties of the machine. If it lowers the temperature 

below the freezing point, to keep in mind the following points:  
 

•

 

To prepare the working place and the material to transport appropriately.  

 

•

 

Not to use frozen material. 

 

 

Содержание Convey 260






















































































Отзывы:

Нет отзывов