manualshive.com logo in svg

UTIFORM Convey 260, Инструкция по эксплуатации, Страница: 24 / 85

Поделиться
Скачать
UTIFORM Convey 260 Скачать руководство пользователя страница 24

Electric Soladora CONVEY 260 

www.utiform.com

  

departamento.té[email protected]    

 

Tfno. + 34 96 570 29 82 fax:  + 34 96 570 29 83 

 

23 

 

•

 

To stuff the deposit of mixing with material supplementary. 

•

 

To control more water when necessary, and in such a case to add more.  

•

 

Before closing the mixture deposit with their corresponding cover, to clean with a brush, or 

something similar, the border of the boiler. 

 

ATTENTION!

  

To fill the boiler with having only mixed 10 - 15 mm until the inferior 

border of the mouth of having filled with the mixture boiler!

 

 

Otherwise he/she shortens the duration of life of the deposit considerably of mixing and their waste 

pieces.  
 

7.6   

To transport 

 

The pressure to generate inside the boiler is carried out pressing the lever (2) prepared in the boiler and 

working the cover down. The process of transport begins with the auxiliary compressor in march and later on 
opening the spherical key (1) of yellow colour prepared in the machine. 

 

 

 

 

 

 

 

7 

 
 

 

 

 

 

 

 

5 

1 

 
 
 
 

 

 

 

 

 

 

6 

 
 
 
 

Never to open the cover if it is low pressure!

 

4

 

 
 

3

 

 
 
 

2

 

 
 
 
 
 

 
 

Nevertheless, this machine this endowed with a safe-deposit system so that the cover of the boiler 

cannot open up with pressure. Before opening the cover of the boiler with the lever (2), it is necessary and 
indispensable to work the lever (3) safe-deposit that works the opening of the escape valve (4) that this located 
in the superior part of the boiler, escaping this way the whole existent pressure inside the boiler. 
 

To clean the borders of the deposit. To change the rubber meeting immediately if this shows bigger 

cracks or if he/she has entered material in the meeting. 

 

Содержание Convey 260






















































































Отзывы:

Нет отзывов