UTIFORM Convey 260, Инструкция по эксплуатации, Страница: 23 / 85

Electric Soladora CONVEY 260
www.utiform.com departamento.técnico@utiform.com Tfno. + 34 96 570 29 82 fax: + 34 96 570 29 83
22
7.3.1 Safe-deposit Systems in the machine
Before starting the machine, all the protection facilities have to be placed and they have to be prepared
to work correctly.
The machine CONVEY fulfils all the requirements of the safe-deposit European norms for construction
machines, for there is it prepared in the machine the necessary safe-deposit systems, like it is the grill prepared
in the mouth of material entrance in the boiler.
This grill has a double safe-deposit system, firstly it takes a screw butterfly that prevents that the grill
can rise and in case this screw takes off and get up the grill, the machine it would not work correctly, since the
air would escape for this hole and in second place, in the grill he/she has prepared an inductive sensor, so that
although the grill rises the diesel motor (according to version) he/she would stop automatically.
Never to play through the safe-
deposit grills!
In situations of danger or when taking place strange noises with the machine in march, to press the
emergency mushroom quickly to stop the machine immediately.
The pusher is activated rotating toward the right again and throwing toward it was.
7.4 Setting in march of the machine
To work the switch-investor star-triangle in the position shatters in first time and followed act to pass to
the position triangle.
The electric operation of the machine this designed so that the alone electric motor can rotate in only
sense, since he/she incorporates a relé detection of phases.
According to the sequence of phases of the source of connected current the motor only starts in a part of
the switch. The other address doesn't work, to avoid in this way that the hydraulic bomb coupled in the redactor
of the own electric motor rotates a contrary sensed to the correct one and damage its internal structure.
The mixer has to rotate against the sense of the needles of the clock seen by the part of behind of the
machine to the deposit of blended.
7.5.1 To mix
The mixture process to continue is the following one:
•
To raise the receiving cone of material above the mouth of having filled with the boiler.
•
To fill the deposit of blended with material supplementary until the half (approx. 100 l).
•
To add the hydraulic agglomerate according to the maker's indications.
•
To add water.