2GM
1-5-6
Problem
Causes/check procedures
Corrective measures
(9)
A paper jam in the
exit section is indi-
cated during copy-
ing or printing (jam
in the exit section).
Jam code 50
Defective registration sen-
sor.
Defective exit sensor.
Check if the lower exit
roller and exit pulleys con-
tact each other.
Check if the upper exit
roller and exit pulleys con-
tact each other.
Check if YC8-7 on the engine PWB remains low when the regis-
tration sensor is turned on and off. If it does, replace the regis-
tration sensor.
Check if YC7-7 on the engine PWB remains low when the exit
sensor is turned on and off. If it does, replace the exit sensor.
Check visually and remedy if necessary.
Check visually and remedy if necessary.
Содержание CD 1018
