Introduction
1-47
Command Dispatcher
S
ec
ti
o
n
1
To add events that will be triggered by the MC-4000 Control Panel click the “Add Event”
button in the Triggers section of the window which will pull up the following window:
Figure 1-28.
Add Event
Selecting the LogoMaster client from the “Select Client” drop down menu will provide options
for defining the event.
The “Trigger ID” numeric value defines which trigger being sent from the MC-4000 will activate
this event. Setting the “SqueezeMax flag” pull down to Display Preset IN will cause this event
to be executed when the MC-4000 panel button is pressed. There are fields for providing a
Trigger Name as well as a Trigger description to help identify the event. The “Command” drop
down allows you to choose which command will be executed and the “Target Scene” value is
where you will define the scene to be either displayed, merged, or subtracted. Once the
settings for the event have been defined click the “Add” button at the bottom of the window
and you will see the event listed over on the left side of the window under Commands.
