ZenCut Black User Manual
Basic Maintenance
6-2
6.2 Cleaning the Grid Drum
1. Turn off the cutting plotter, and move the tool carriage away from the area needed
to be cleaned.
2. Raise the pinch rollers and move them away from the grid drum for cleaning.
3. Use a bristle brush (a toothbrush is acceptable) to remove dust from the drum
surface. Rotate the drum manually while cleaning. Refer to
Figure 6-1
.
6.3
Cleaning the Pinch Rollers
1. If the pinch rollers require a thorough cleaning, use a lint-free cloth or cotton swab
to wipe away the accumulated dust from the rubber portion of the pinch rollers. To
prevent the pinch rollers from rotating while cleaning, use your finger to hold them
in place.
2. To remove the deeply-embedded or persistent dust, use the lint-free cloth or
cotton swab moistened with rubbing alcohol.
Figure 6-1
Note:
Daily maintenance of your cutting plotter is very important. Be
sure to clean the grid drum and pinch rollers regularly for better
cutting accuracy and output quality.
