ZenCut Black User Manua
l
Step 3
Move
the pinch rollers manually to the proper position. Be sure the pinch rollers are positioned
above the grid drum. The
white marks
on the top rail will remind you where the grid drums are
(Figure 4-3).
White marks
Figure 4-3
Step 4
Push the lever backward to lower down the pinch rollers.
Step 5
Turn on the power. The tool carriage will measure the size of the media automatically.
Note:
1. Always adjust the position with the pinch roller raised.
2. Move the pinch roller by applying force at the rear portion of the pinch roller support.
3.
Do not
move the pinch roller by holding the front rubber roller
(Figure 4-4).
Figure 4-4
Incorrect
(X)
Operation
4-2
