9
Injection Panel Installation Instructions
Installation, Operation and Maintenance Manual
FSF-200-OG, FSF-250-OG, FSF-300-OG,
FSF-500-OG
1. Layout the parts for the injection panel, then find the location where the panel will be in-
stalled. Install the stainless steel mounting bar. A level can be used to make sure the bar
is installed properly. This bar should be secured to the wall studs or wood backing plate
that is secured to the wall studs.
Strainer Filter
Sump
#30 and #100
Mesh Strainers
1/4” Tubing
Spare
Pump Tube
Weighted
Suction
Strainer
Injection
Pump Rain
Roof
Spare Injection
Pump Head Clips
Stainless Steel
Mounting Bar
3/4” Union
Adaptors
1” x 3/4” Bell
Reducers
Mounting Screws,
Nuts and Sleeves
for 1/4” Tubing
Connections