17
1. Plug the chemical injection panel in the wall. Pour the supplied Hydrogen Peroxide
into the chemical solution tank. Unplug the pump power cord from the PCM on the
injection panel and attach it to an extension cord that is energized. Turn the switch
on the injection pump to the on position and allow the chemical pump to prime with
peroxide. Typically the peroxide can be seen traveling through the tubing. Once the
pump is primed, unplug the pump from the extension cord and plug it back into the
PCM on the injection panel.
1. Set the knob on the PCM to 50%
Installation, Operation and Maintenance Manual
FSF-200-OG, FSF-250-OG, FSF-300-OG,
FSF-500-OG
Chemical Injection Panel Start-up Instructions
PCM
Injection Pump
Plug
Pump Rate
Control Knob
