19
1) Plug in the control valve and press and hold the “Settings” button on the control
valve to enter the programming mode. If the control valve is locked, press and hold
the “Settings” button to unlock the valve, then press the “Settings” button again to
enter the programming mode.
2) When in the programming mode there will be a black cursor that appears over the
value. The “UP” and “DOWN” arrows can be used to change the value. Once the
value is set, the “Settings” button can be pushed to save the setting and move to the
next parameter.
3) Set the “Time of Day” and the “Date”.
4) Set the “Regen Days” to the desired value (contact US Water Systems for help with
the proper frequency. Typically 3 days will work for most applications).
5) The “Gallons” parameter should be set to “Off”.
6) The “Regeneration Time” should be set to around 2-3 hours after bedtime to ensure
the system is not regenerating during usage hours. If there is other backwashing/
regenerating equipment be sure to offset the regeneration/backwash times of each
of those units so each unit can backwash/regenerate independently.
TIME OF DAY, YEAR, MONTH, DAY,
Time of day is for normal operation of system and the scheduling of the
regeneration time. The date is used in a diagnostic function to track the
last time the system regenerated.
REGEN DAYS
This value is the number of days between regenerations or back washes to
clean the filters.
GALLONS
Default value is OFF. This should not be changed.
REGEN TIME
This setting determines the time of day to perform a scheduled regenera-
tion. The normal regen time for a filter is 12:00 AM.
Settings
Press SETINGS key (3 SECONDS / BEEP)
VALVE MODE
B.W. FILTER
TIME OF DAY
12:01 PM
YEAR
2012
MONTH
AUGUST
DAY
21
REGEN DAYS
3 DAYS
GALLONS
OFF
REGEN TIME
12:00 AM
PROGRAMMING
COMPLETE
Installation, Operation and Maintenance Manual
FSF-200-OG, FSF-250-OG, FSF-300-OG,
FSF-500-OG
Control Valve Programming Instructions
