Unitest TELARIS LOOP, Инструкция по эксплуатации

Страница: 13 / 20

English
13
Storing Measurement Result
turn plug
turn plug / exchange L-N
Frequency measurement f
50Hz
Frequency measurement
Frequency below 10Hz or
above 200 Hz
Voltage measurement
U AC 230 V
Voltage measurement V AC
Voltage above 300V
Memory address assignment
Memory address number 8
8.0 Storing Measurement Result
Possibility to store measurement values by means
of the key „Store" (19) after completion of measu-
rement. Altogether, 250 measurement values may
be saved. Proceed as follows:
Carry out measurement
Read measurement value on display.
Save measurement result by pressing key
„Store" (19).
Upon completion of storing, a short signal is au-
dible and the symbol„M" (11) appears in the
display for memory location.
In case of a full memory, the symbol „M"
blinks. Storing another value impossible.
The stored data is maintained even when the
instrument is switched off or during battery re-
placement.
Double storing is impossible ! A double beep
signal is audible
Measurement results may only be stored in the
resistance measurement ranges.
Additionally, all stored measurement data may be
transferred to the PC (data archive) by means of an
infrared interface (22). For this purpose, the inter-
face adapter, available as optional feature (Cat. No.
1204) is required. Please refer to the instructions of
the interface adapter.