Unitech MS842N, Руководство пользователя

Страница: 21 / 132

Enter Setup
13 ** Exit Setup
Convert Case
Scan the appropriate barcode below to convert all bar code data to your desired case.
** No Case Conversion
Convert All to Upper Case Convert All to Lower Case
Example: When the Convert All to Lower Case feature is enabled, barcode data “AbC” is transmitted as “abc”.
Emulate Numeric Keypad
When this feature is disabled, sending barcode data is emulated as keystroke(s) on main keyboard.
To enable this feature, scan the Emulate Numeric Keypad barcode. Sending a number (0-9) is emulated as keystroke(s)
on numeric keypad, whereas sending other character like “+”, “_”, “*” , “/” and “.” is still emulated as keystrokes on main
keyboard.
Numeric keypad is usually situated at the right of the main keyboard. The state of Num Lock on the simulated numeric
keypad is determined by its equivalent on the Host. If Num Lock on the Host is turned off, the output of simulated numeric
keypad is function key instead of number.
Emulate Numeric Keypad ** Do Not Emulate Numeric Keypad
Note: Make sure the Num Lock light of the Host is turned ON before enabling this feature.
Simulate ALT+Keypad ON prevails over Emulate Numeric Keypad .