Unipulse TM700, Руководство по эксплуатации

Страница: 46 / 91

37
5 SETTING OF FUNCTIONS
37
SE
TT
IN
G
O
F
FU
N
C
TI
O
N
S
Chapter
5
■
Hold trigger stop level
Set the hold trigger stop level in the case where the section setting is "level trigger section".
≪
Setting value
≫
-99999 to 99999
How to set
■
Hold trigger slope
Set the hold trigger slope conditions in the case where the section setting is "level t timer
section" or "level trigger section".
≪
Setting value
≫
Either Edge, Rising Edge, Falling Edge
- Either Edge: Detection starts when the indicated value passes hold trigger start level.
- Rising Edge: Detection starts when the indicated value passes hold trigger start level in the
direction from smaller toward larger values.
- Falling Edge: Detection starts when the indicated value passes hold trigger start level in the
direction from larger toward smaller values.
How to set
■
Hold section time
If you set the hold section setting in the hold function setting to "external t timer section" or
"level t timer section", set the time.
≪
Setting value
≫
0.001 to 9.999 [sec.]
How to set
SET. Hold Setting Page 2
→ →
Meas. Setting
→
SET. Hold Setting Page 2
→ →
Meas. Setting
→
SET. Hold Setting Page 2
→ →
Meas. Setting
→
Detection time for maximum average value in average value hold
Although the detection section is specified by the SECTION signal, etc., detection
cannot be carried out exceeding the maximum average value detection time. If
the maximum average value detection time is exceeded, detection ends
automatically, when the average value is held.
Point