UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
64
Revision 2.05
Of 107
13.5.1.6. Menu
Add address range
The menu allows the user to add
a group of devices, having
consequent addresses in a single
loop, to the zone:
For each group of devices the
user shall enter:
−
The loop where the group is
included in – if no value is
entered, by default will be
accepted Loop 1;
−
The address of the first
device in the group – if no
value is entered by default
will be accepted Address 1;
−
The address of the last
device in the group – if no
value is entered by default
will be accepted Address 1.
Press button
to add the free devices in the group to the zone; the limit of 60 devices in a
zone is accordingly observed. The following information is displayed:
−
If less than 60 devices are available in the zone – a screen for the selection of a group of
devices that are to be added, and the most recent data is saved;
−
If 60 devices are already added to the zone – a screen with the message
Full Zone
appears;
the only option is to exit the menu.
In both cases the number of the devices added to a zone is displayed in the bottom section of the
panel.
Mode: DAY
11:35:12
Thu 24 Mar 2005
SetUp Zone 1
Add address range
Total:
17
Loop: _
From address:
To address:
0
1
2
3
4
5
6
7
8
9
С
