UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
56
Revision 2.05
Of 107
13.4.2. Menu
Device parameters
The menu is used to set up the parameters of the devices integrated in the fire alarm loop Enter
the menu to display:
−
If no devices are included in the loop – a screen with the message
No devices included;
the
only option is to exit the menu;
−
If some devices are included
in the loop – a screen where
you may select the device
whose parameters are to be
set up:
For each device are displayed:
−
Its number (address) in the
loop – in the top line;
−
Text message – in the line
beneath.
The current device is pointed by
arrow – „
>>
”.
Buttons
and
at the right
panel side are visualized if more than
one device is available in the loop;
the
Go to
field on the panel heading
and the digit buttons appear if more
than 7 devices are available in the loop. Press a digit button, the
Go to
field is activated and a random
3-digit address for each device in the loop can be entered. To edit the address use button
; press
it and the last entered digit will be deleted.
Press button
after you entered a number in the
Go to
field; then the device whose address
is in the field will be selected:
−
If the number is 0, the device having address 1 will be selected;
−
If the number is higher than the actual number of devices in the loop, the device having the
highest address number will be selected
Simultaneously, the number in the
Go to
field will be deleted, i.e. the field is deactivated.
Press button
after you entered a number in the
Go to
field and the field will be deactivated.
Press button
when the
Go to
field is empty and a menu containing a group of parameters
for the selected device will be displayed:
−
Menu
Device parameters
;
−
Screen
Text message
.
Mode: DAY
15:34:53
Tue 22 Mar 2005
SetUp Loop 1
Devices Total: 37
Go to:
>>
А
ddr1
Point 1.001
А
ddr2
Point 1.002
А
ddr3
Point 1.003
А
ddr4
Point 1.004
Ад
ddr5
Point 1.005
А
ddr6
Point 1.006
А
ddr7
Point 1.007
0
1
2
3
4
5
6
7
8
9
С
С
