UniPOS Fire Control Panel FS4000
Instruction manual
Page 22
Revision 11/01.17
of 34
14.1.3.Preparation of the necessary cables in the cabinet of the FCP.
- The length of the mains cable line (220 Vac), placed inside the cabinet must be 185 mm, as
marked on the draft fig.7(A);
- The length of the signal line cables, placed inside the cabinet must be 300 mm, as marked on
the draft fig.7(B).
As a result, the wires will be flexible enough to move the interface board inside the cabinet,
with the signal lines already connected to the FCP connectors.
Fig.7.(A)
Fig.7.(B)