UniPOS Fire Control Panel FS4000
Instruction manual
Page 27
Revision 11/01.17
of 34
14.1.7.
Мains power line (220VAC) connection to the main interface board.
The interface board is put back to its initial position (Fig.12) :
- The bottom side of the interface board is mounted on the holders (fig.12, pos.1);
- The top side of the interface board is pushed until the top-side holders click to fix it
(fig.12,pos.3);
- The power line is connected in the PCB connector in FCP (fig.12, pos.4);
- Fully tighten the signal line cables, dedicated to the conventional zones and fire alarm and
protection equipment (fig.12, pos.5).
Fig.12