Uninterruptible Power Supplies PowerWAVE 1000, Руководство пользователя

Страница: 32 / 65

3: Installation and Set-up
26
UPS725-02-02 PowerWave 1000 (4.5 - 10 kVA) User Manual UK Dated 13/03/15
4.5 kVA and 6.0 kVA UPS
Figure 3.9 4.5 kVA & 6.0 kVA power connections
8.0 kVA and 10.0 kVA (single phase input) UPS
Figure 3.10 8.0 kVA and 10 kVA (single phase) power connections
OUTPUT
OUTPUT
L L
N N
INPUT
INPUT
OUTPUT
G2 N22 L22 G1 N1 L12
INPUT
A plug complete with pre-wired power cables is
supplied with the UPS.
To connect the power:
Remove the cover from the socket on the back of the
UPS.
Fit the cabled plug into the socket and lock it in place
using the clamp bar located on the socket housing.
(3) Output Live
(4) Output Neutral
(5) Earth (Ground)
(1) Input Live
(2) Input Neutral
Output Live
Output Neutral
Output Earth
Input Live
Input Neutral
Input Earth
SYSTEM
RATING
UPS BATTERY
Max. Current Conductor Torque Max. Current Conductor
4.5 kVA 25A 6 mm² 2 Nm 19A 6 mm²
6.0 kVA 33A 10 mm² 2 Nm 25A 6 mm²
(Ground) (Ground)
All cables must be supplied by the customer.
To connect the power:
Open the terminal block on the back of the UPS.
Connect the individual input/output power cables and
secure them in place using the two clamps fitted to
the inside of the terminal block cover.
Output Line [L21]
Output Neutral [N22]
O/P Earth (Ground) [G2]
Input Line [L12]
Input Neutral [N1]
Bypass Line [L11]
Input Earth (Ground) [G1]
(Not used)
SYSTEM
RATING
UPS BATTERY
Max. Current Conductor Torque Max. Current Conductor
8.0 kVA 43.4A 10 mm² 2 Nm 33A 6mm²
10.0 kVA 54.3A 16 mm² 2 Nm 41A 10 mm²
Output Line [L21]
Output Neutral [N22]
Output Earth [G2]
Input Line [L12]
Input Neutral [N1]
Input Earth [G1]
(Ground) (Ground
The cabling methods for the 8.0 kVA and 10.0 kVA are similar to
those described above for the smaller models.
The major difference is that the terminal block version can have
an optional split bypass facility whereby the utility input and
bypass input supplies can be connected to independent sources.
DUAL INPUT MODEL
SINGLE INPUT MODEL