Unigas TN90, Руководство по установке, использованию и обслуживанию

Страница: 100 / 112

(
tCI - Pb2
probe only for mechanical atomizing burners)
Menu :
To enter the menu below, keep pushing
ENTER
for more than 3 s.
Menu code Sub-menu code Function Notes
Prb Probes values You can see in sequence the 4 probe
values (UP and DOWN keys): the probe
code is on display A (Pb1,..., Pb4) and the
probe value is on display B (not fitted or out
of work probes show “----“).
Log Login It defines the access level to menu and
parameters (password)
PAS Password Password input
Par Parameters menu Access to parameters (you have to login
first)
CnF Configuration menu Parameter configuration
rEG Regulation menu Set to set-point, probe, thresholds etc.
ALA Alarm menu Access to alarm management
Act Active alarms Show the active alarms
rES Reset alarms Reset of the manual reset alarms
Loc Lock/Unlock functions Not used
InF rEL Software version Installed software version
tUN Autotuning Activation On, deactivation ESC
PID parameter autotuning
Login:
All the parameters inside the
Par
menu are locked by a password.
Without password, only set-points can be modified.
To login, on the log menu, press
ENTER
for more than 3 s. Input your password (level 2 or 3) inside
PAS
With password for level 3 all the data can be set.
COD. M12924CA Rel. 0.5 03/2016