administration.fm
A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation
85
Administration
Security
3.5.6.3
Character Set
The composition of the password can be configured in detail.
•
Ucase chars reqd.
: Defines the minimum number of uppercase characters. Value range:
0 to 24
•
Lcase chars reqd.
: Defines the minimum number of lowercase characters. Value range:
0 to 24
•
Digits required
: Defines the minimum number of digits. 0 to 24
•
Special chars reqd
: Defines the minimum number of special characters. The set of pos-
sible characters is ` - = [ ] ; ’ # \ , . / ¬ ! ” £ $ % ^ & * ( ) _ + { } : @ ~ | < > ?
Value range: 0 to 24
•
Bar repeat length
: Specifies the maximum number of consecutive uses of a character.
Value range: 0 to 24, but not 1 (with 1 set as value, no password would be valid, because
it would be forbidden to use any character once).
•
Min char difference
: Specifies the minimum number of characters by which a new pass-
word must differ from the previous password. Value range: 0 to 24
Administration via WBM
Security and Policies > Password > Character set
3.5.6.4
Change Admin and User password
The passwords for user and administrator can be set here. They have to be confirmed after
entering. The factory setting for the Admin password is "123456"; it should be changed after
the first login (Password handling in previous versions see Section 3.19, “Password”).
Administration via WBM
Security and Policies > Password > Change Admin password
Special chars reqd
Bar repeat length
Min char difference
Character set
0
Digits required
Submit
Reset
0
0
Ucase chars reqd.
Lcase chars reqd.
0
0
0
Change Admin password
Old password
New password
Confirm password
Submit
Reset
