SHB_PNG09.fm
A31003-G2100-S100-2-7620, 03/2014
PNG Configuration for Gigaset M2
plus
and M2 Ex professional, Service Manual
55
PNG configuration checklist
9
PNG configuration checklist
Checklist
Setting
Done
yes/no
1. Reset PNG configuration to default
2. Adjust sensors
3. Configure alarms:
–
Set the alarm number basis
–
Check the PNEZ basis
–
Set the alarm call count (for secure alerting)
–
Set the repeat alarm time (for secure alerting)
–
Signal Off - manual = on (to manually deactivate the alarm signal)
–
Autom. alarms OFF = Off in charger (to suspend automatic alarms du-
ring charging)
–
Configure alarm (via the emergency key)
–
Check Transport Time (2 s)
–
Configure automatic alarms:
(
Note:
At least one alarm must be switched on to guarantee configurati-
on compliant with BGR 139.)
–
Non Movement on/off
–
Man Down Alarm on/off
–
Time Alarm on/off
–
Escape Alarm on/off
–
Pull Cord Alarm on/off
–
Configure alarm parameters for each active alarm:
Response time/Prealarm time/Alarm Signal/Sensitivity level (for es-
cape alarm)/Alarm destination?
(
Note:
See Table 9-2 "Response time in accordance with VDE
0825" -> PNA-S column to guarantee configuration compliant with
BGR 139.)
–
Technical Warning on/off
–
Configure parameters:
Alarm Signal / Out of range time
Table 9-1
PNG configuration checklist
