Activating the PNG Functionality on the Handset
A31003-G2100-S100-2-7620, 03/2014
12
PNG Configuration for Gigaset M2
plus
and M2 Ex professional, Service Manual
SHB_PNG06.fm
Preventing PNG Configuration Changes
6.3
Preventing PNG Configuration Changes
Activating the PNG functionality blocks certain handset settings for users (forinstance, PNG
Configuration, Reset Handset, Select Base , Register H/Set, etc.).
You are requested to enter a PNG service PIN when you try to activate a blocked function. The
function will only activate if you enter the correct PIN.
6.4
Emergency Alarm Deactivation
The handset cannot be switched off in monitoring mode (monitoring LED flashing) or alarm
mode (monitoring LED permanently lit).
Users can perform "emergency alarm deactivation" at the handset if they are unable to deacti-
vate an alarm during handset alerting because the handset was not properly configured,
forinstance.
Emergency alarm deactivation is reserved for PNG Service. In other words, emergency alarm
deactivation is, like other configuration changes, protected by the "PNG Service PIN".
Procedure
1. Press and hold down the On-hook key during an alarm interval. The PNG requests the
"PNG Service PIN".
2. Enter the "PNG Service PIN". The alarm status is deactivated at the handset once the PIN
has been entered.
7
Caution
Emergency alarm deactivation does not conform to BGR 139. During regular oper-
ation, deactivation must be performed by the PNEZ.
7
Caution!
If the PNG is being operated without PNEZ (Configuration: "PNEZ Basis" = "blank"),
this is deactivated without requesting the PNG Service PIN.
