4
INITIAL SETUP
HEADSET
ANSWER
INTERCOM
DISPLAY & LED INDICATION
INITIAL SETUP
PACKING LIST
Telephone Base
Handset
Coiled Handset Cord
Owner’s Guide
PROGRAM FEATURE
FACTORY PRESET SETTING
REFERENCE PAGE
Area Code
The area code is set to “000”
14
Auto Answer
Auto Answer is ON for intercom use
13
Always Ring
The default is OFF for incoming calls when
15
you are already on a line
Call Waiting Caller ID
Call Waiting Caller ID is set to OFF and ALL,
22
so all caller ID records are retained
Default Ringer Volume
The default ringer volume is set to HIGH
15
(on the back of the unit)
Flash Duration
The flash duration is set to 600 MS
20
Outside Line
The outside line is set to “-“
14
Ringer
The ringer is ON for all installed lines
15
SYSTEM DEFAULTS
Once initial setup is complete, the unit is ready to use with the following program defaults.
Programming each of the settings below needs to be done at each station:
Two long RJ14 Telephone Cords
AC Adapter
Mounting Pedestal
Spare Autodial Station Card
INITIAL SETUP
BUTTONS & INDICATORS
ACTION
DESCRIPTION
Headset (Answer)
Lights red
When pressed to go off-hook using a
headset
Intercom
Lights red
During an all station page
Lights red
When pressed to intercom another
station
Flashes red
When your station is being intercommed
and Auto Answer is turned off
Mute
Lights red
When pressed to mute an intercom or
off-hook conversation
Speaker
Lights red
When the speakerphone is activated
Transfer
Displayed
When pressed to transfer a call