15
AUTOANSWER: ON
BACK CHANGE NEXT
RINGER SELECT
PROGRAMMING
RINGER SELECT
BACK ENTER NEXT
AUTO INTERCOM
BACK ENTER NEXT
Ringer settings for each outside line are individually controlled at each station. When the ringer
is turned “ON,” the line will ring when calls are received. When the ringer is turned “OFF,” that
line will not ring when a call is received. Whether the ringer is turned on or off, the LINE
INDICATORS will operate normally.
You can determine which lines ring at your station. All four lines are factory preset to ring on the
unit.
PROGRAMMING THE TELEPHONE
SETTING THE RINGER ON/OFF BY LINE
PLEASE SELECT
PHON TIME OTHER
AUTODIAL SETUP
BACK ENTER NEXT
FLASH: 600 MS
BACK CHANGE NEXT
LINE1 RING:OFF
BACK CHANGE NEXT
LINE1 RING:ON
BACK CHANGE NEXT
The “
LINE RING
” and line number will
appear on the display.
7.
Press the soft key under “
CHANGE
” to
toggle between turning the ringer “
ON
” or
“
OFF
” for the selected line.
8.
Press the soft key under “
NEXT
” to
advance to the next line selection.
9.
Repeat steps 7 and 8 until all lines have
been programmed.
10.
Press
to exit.
ALWAYS RING is set to OFF by default. If you want to hear the phone ring when you are on
another line using the handset or the headset, change this setting to ON.
The telephone will NEVER ring while you are on another line using the SPEAKERPHONE,
regardless of the setting of ALWAYS RING to prevent the other party from hearing the phone
ring.
ALWAYS RING
4.
5.
Press
to exit.
ALWAYSRING:OFF
BACK CHANGE NEXT
1 .
Follow steps 1-5 above under “SETTING
THE RINGER ON/OFF BY LINE.”
2.
3.
1 .
Press
.
2.
3.
4.
5.
6.