13
ON: SELECT LN34
BACK SAVE ON/OFF
9.
10.
3 and 4 will be flashing. Use the keypad
to select the line or lines that will be
private. Selected numbers will be
displayed and flashing.
12.
13.
Press
to exit.
NOTES:
■
Two or more stations can share the same private
line(s), but under this condition your private line calls
will always be accessible (always be privacy
released) to those stations.
OFF
BACK SAVE ON/OFF
ALWAYSRING: OFF
BACK CHANGE NEXT
AUTOANSWER: ON
BACK CHANGE NEXT
RINGER SELECT
BACK ENTER NEXT
AUTOANSWER: ON
BACK CHANGE NEXT
PROGRAMMING
PROGRAMMING THE TELEPHONE
3 .
Once your selection appears in the
display, press
to exit.
SETTING AUTOMATIC ANSWER
When auto answer is turned on and a station receives an intercom call, the station does not
intercom ring. Instead, the speakerphone automatically answers the intercom call.
To program the auto answer feature,
1 .
Follow steps 1-5 above under “SETTING A
PRIVATE LINE.”
2.
Press the soft key under “
CHANGE
” to
toggle between “
ON
” and “
OFF
.”
SETTING A PRIVATE LINE
FLASH: 600MS
BACK CHANGE NEXT
AUTODIAL SETUP
BACK ENTER NEXT
PLEASE SELECT
PHON TIME OTHER
PRIV LINE: OFF
BACK CHANGE NEXT
ON: SELECT LN34
BACK SAVE ON/OFF
You must share lines 1 and 2 with all other stations in the system. However, you can create a
non-square configuration as described on page 7 using lines 3 and/or 4, so that your station has
different telephone number(s) from the other stations lines 3 and/or 4. More than one station
can share a private line. CONFIGURE THE LINE CORDS OF YOUR UNIT INTO THE TELEPHONE
LINES YOU WANT TO USE and follow the programming steps below.
1 .
Press
.
2.
3.
4.
5.
6.
7.
8.