Uniden 410, Руководство пользователя, Страница: 18 / 50

18
9.
PROGRAMMING
02
BACK EDIT NEXT
02 G
< SAVE NEXT
02 <NAME>
< SAVE NEXT
02 3105551212
< DEL NEXT
PROGRAMMING AUTODIAL
ENTERING AUTODIAL RECORDS
To manually enter a name and number into autodial,
AUTODIAL SETUP
BACK ENTER NEXT
01
BACK EDIT NEXT
02 GRANDMA
< SAVE NEXT
PLEASE SELECT
PHON TIME OTHER
FLASH: 600 MS
BACK CHANGE NEXT
Use the keypad to enter the name, up
to 14 characters. Pressing a key once
will display the first letter on that key.
Pressing it repeatedly will cycle through
all the characters on the key.
NOTE:
■
Pressing the 1 key will add a space.
10.
When the desired letter appears in the
display, press the soft key under
“
NEXT
” to move the cursor to the
right.
1 .
Press .
2.
3.
4.
5.
Press the soft key under “
NEXT
” to select
an autodial location (01-20).
6.
7.
If a number has not already been
programmed, “
<NUMBER>
” will appear in
the display. Use the keypad to enter the
autodial number, up to 16 digits.
, ,
and
FLASH
can be entered as well. If
the number is entered incorrectly, press
the soft key under “
<
” to move the cursor
left and the soft key under “
DEL
” to
remove digits. Use the keypad to
re-enter the correct digits.
NOTE:
■
Include the outside line digit if one is needed to dial
out of the system.
8.
11.
Repeat steps 8 and 9 until the name is
entered.
12.
13.
Repeat steps 4 through 11 to program
the remaining autodial numbers.
14.
Press to exit.