
14
4 .
5.
Press
to exit.
OUTSIDE LINE:-
BACK CHANGE NEXT
AREA CODE: 310
BACK SAVE NEXT
PROGRAMMING
6.
Press the soft key under “
CHANGE
” until
the correct digit is displayed. (0 1 2 3 4 5
6 7 8 9 )
NOTE:
■
If an outside line is not needed, make sure there is a “-
” in the display.
7.
When the correct outside line digit appears
in the display, press “
NEXT
” to save.
8.
Press
to exit.
PROGRAMMING THE TELEPHONE
SETTING THE OUTSIDE LINE
If you must dial an outside line to access a dial tone, you can program the phone to
automatically dial the outside digit when calling a stored caller ID record.
1 .
Press
.
2.
3.
4.
5.
PLEASE SELECT
PHON TIME OTHER
CALLER ID
BACK ENTER NEXT
CWCID ON
BACK CHANGE NEXT
SAVE: ALL
BACK CHANGE NEXT
SETTING THE AREA CODE
The area code is always included in caller ID records with telephone numbers. When your local
area code is programmed into the unit and you press
to call a local caller ID record,
1 .
Follow steps 1-5 above under “SETTING
THE OUTSIDE LINE.”
2.
3
. Using the keypad, enter in your three digit
area code.
OUTSIDE LINE:-
BACK CHANGE NEXT
the area code is automatically removed.
If you must dial 10 or 11-digits when dialing from your area, leave the area code setting at 000.
The unit will prompt you to choose between 7, 10, 11 or 8-digit dialing each time you make a
caller ID call.
If you reside in a 7-digit dialing area, the unit can make returning phone calls easier by
automatically dialing stored Caller ID numbers. In order for this feature to work correctly, it is
necessary to program your local area code into the unit.
To program your local area code,