
10
DATE (MM/DD)
BACK SAVE NEXT
Press the soft key under “
CHANGE
” to
toggle between “
AM
” and “
PM
”.
5.
6.
Use the keypad to enter the month (01-12)
and day (01-31). To edit your entry, press
the soft key under “
BACK
” to re-enter the
date.
7.
8.
9.
“
INITIAL SETUP COMPLETE
” will
appear in the display.
STATION 11 SET
BACK
NEXT
1.
2.
3.
Press the soft key under “
CHANGE
” until
the chosen extension number (11-22)
appears in the display.
INITIAL SETUP
QUICK SETUP
SET STATION ID
NEXT
SET STATION 11
CHANGE SAVE
INITIAL SETUP
START
On initial power-up (the line cord(s) and AC adapter are connected) each station will prompt the
user to set the station ID, time and date. All other system defaults (see SYSTEM DEFAULTS on
page 4) are in place and the station is immediately ready for use. Refer to your completed system
configuration diagram, on page 8, for rapid installation.
SETTING THE TIME AND DATE
1 .
Use the keypad to enter the hour (two
digits) and minutes (two digits). Your
entries will appear in the display as they
are typed. If the time entry is incorrect,
press the soft key under “
BACK
” to
re-enter the time.
2.
3.
4.
TIME (HH:MM)
BACK SAVE NEXT
1/01 8:24
AM
AM/PM
BACK CHANGE NEXT
1/01 8:24
AM
TIME (HH:MM)
BACK SAVE NEXT
1/01 8:24
AM
AM/PM
BACK CHANGE NEXT
1/01 8:24
AM
ASSIGNING A STATION EXTENSION NUMBER
DATE (MM/DD)
BACK SAVE NEXT
4/ 18 8:24
PM
TIME (HH:MM)
BACK SAVE NEXT
1/01 12:00
AM
NOTE:
■
If another station’s ID number is chosen, an error
beep will be heard and “
NOT AVAIL
” will appear in
the display. Press the soft key under “
CHANGE
” to
select another extension number.
4.
“
STATION 11 SET
” will appear in the
display.
5.
Press the soft key under “
NEXT
” to
program the time.
INITIAL SETUP