Unical STILE 27, Инструкция по установке, техническому обслуживанию и эксплуатации

Страница: 41 / 60

Programming setting
4 1
7.5 - USER OPERATING MODE
The normal operating mode of the panel installed on STILE 27 is described hereafter referring to the functions available for the
user.
The subsequent paragraphs analyse the technical programming mode.
Before starting up STILE 27, the display appears as follows.
7.5.1 - LIGHTING STILE 27
To light STILE 27, press 3 for a few seconds.
Ignition is indicated on the display as shown in the following figure
7.5.2 - STARTING PHASE
STILE 27 carries out the starting phases in sequence according to the modes defined by the parameters which manage their
levels and times.
7.5.3 - FAILED IGNITION
After 20 minutes have elapsed, if the flue gas temperature has not reached the minimum allowed value + 2°C, STILE 27 goes
into the alarm status.
fig. 27
fig. 28
14 : 24
21°C
SPENTO
orologio temperatura ambiente
dialogo temperatura acqua
49°C
14 : 35
21°C
START
orologio temperatura ambiente
dialogo temperatura acqua
36°C
dialogue
clock
water temperature
room temperature
clock
room temperature
water temperature
dialogue