Unical STILE 27, Инструкция по установке, техническому обслуживанию и эксплуатации

Страница: 4 / 60

4
General information
1.1 - SYMBOLS USED IN THE MANUAL
Pay special attention when reading this manual to the parts marked by the symbols:
NOTE!
Suggestions for the user
ATTENTION!
Possible hazardous situation
for the product and the environment
DANGER!
Serious danger for
personal safety and life
1.2 - APPROPRIATE USE OF APPLIANCE
The STILE 27 appliance has been built according to the current level of engineering and acknowledged
technical safety rules.
Nonetheless, if improperly used, dangers could arise for the safety and the very life of the user and other
persons or damage to the equipment or other objects.
The appliance is intended to operate in hot air circulation heating systems. Any other use must be
considered improper.
UNICAL shall not be held liable for any damage resulting from improper use; in this case the user is fully
responsible for the risk.
Use according to the intended purposes also includes careful compliance with the instructions in this
manual.
1.3 - WATER TREATMENT (see specific booklet)
• The hardness of the feed water conditions the frequency at which the domestic hot water exchanger must be
cleaned.
• If the water has a hardness greater than 15°f, we recommend using water softeners, chosen according to the
characteristics of the water.
• We recommend checking and cleaning the eventual domestic hot water exchanger at the end of the first year
of use and every two years thereafter.
1.4 - INFORMATION FOR USER
• The user must be instructed concerning the use and operation of his heating system, in particular:
• Deliver these instructions to the user, as well as other documents concerning the appliance inserted in the
envelope contained in the packaging. The user must keep this documentation so that it is available
for further consultation .
• Inform the user about the importance of the air vents and the flue gas exhaust system, highlighting
their essential features and the absolute prohibition of modifying them.
• Inform the user concerning controlling the system’s water pressure as well as operations to restore it.
• Inform the user concerning correct temperature control, control units/thermostats and radiators for saving
energy.
• Remember that the system must receive regular maintenance once a year and a combustion analysis
must be performed in the timetable foreseen by standards in force.
• Should the appliance be sold or transferred to a new owner or if you move and
leave the appliance, always make sure that the instruction booklet accompanies it in order to be
consulted by the new owner and/or installer.
1
GENERAL INFORMATION
Attention: this manual contains instructions for the exclusive use of the professionally qualified installer and/or
maintenance technician in compliance with current legislation.
The user is NOT qualified to intervene on the heat stove.
The manufacturer will not be held liable in case of damage to persons, animals or objects resulting from failure to
comply with the instructions contained in the manuals supplied with the heat stove.