Umano Medical OOK Snow FL36 Скачать руководство пользователя страница 7

Страница: 7 / 91

USER MANUAL — 74-36121-ENG R2

INTRODUCTION

This manual includes instructions and information that are necessary for a normal and secure use of the

ook<snow>>

bed designed for mental health environment, model FL36 and FL36-SC. Reading and

understanding of instructions and information included in this manual, or other documents supplied with the

product, are required prior to usage, or prior to perform maintenance on the equipment.

Product description

The

ook<snow>>

, model FL36 and FL36-SC, is an AC-powered medical bed with 4 built-in electric DC

actuators and controls that is designed for medical purposes in mental health care units and/or environments.

The height and surface contours are adjustable. The patient sleep surface can be 80" long or, up to 84" or 90"

with an integrated bed extender and cushion. The bed configuration includes movable and latchable siderails,

or patient mobilization helper, and tamper-resistant fasteners. Optionally, the bed can be configured without

siderails, with permanently attached headboard and footboard and/or short or quick-disconnect power cord to

suit specific mental health care needs.The product offers a range of other options and accessories outlined in the

manuals, including, but not limited to: bed exit system,

bed status monitoring, integrated bed extender, motion

interrupt system, floor mount fixation and, filled siderails and boards. An integrated scale system is also offered

for healthcare professionals to follow patient weight fluctuation. The overall capacity of the bed goes up to is

600 lb/272 kg. The expected life under normal usage and maintenance is 15 years.
A connectivity option is also offered on the bed; a communication board is integrated to the bed which allows to

send information to the Umano Connect web application server through an Ethernet or Wi-Fi connection using

an internal communication protocol. The hospital personnel can access the web application through an Internet

browser to display the beds information such as bed statuses, alarm, weight logs, etc. The hospital can integrate

the beds to their Real-Time locating system (RTLS) using the Bluetooth Low Energy (BLE) or the Wi-Fi tag

configuration. An Application Programming Interface (API) is available for the hospital to access the beds’ data

and to send information to their own system or platform.

The

ook<snow>>

, model FL36-SC, shares the same construction as the FL36, but is however intended for

markets where local regulations require scale systems conformity to metrological controls (OIML R76-1).

Product intended use

The

ook<snow>>

, model FL36 and FL36-SC, is intended to be used as a patient bed for rest/sleep as well as

for alleviation of, or compensation for, an injury, an handicap or the patient condition. It is to be used with patients

that may have special safety needs, such as patients with mental health illness, in mental health care units and/or

environments. It is designed and intended for procedures and usage in, but not limited to, the following adapted

health care environments: intensive or acute care, professional long-term care, outpatient care, rehabilitation

centers and, recovery or therapeutic areas. Optional specific features were designed and are intended for

patients that may be at risk of self-harm. Those features involve application restriction such as: the short power

cord, permanently attached headboard and footboard and bed without siderails.

Application environments and

limitations

are detailed in next section (page 7).

The bed is designed for the use of one single person and, to be used with a sleep surface and can be used for

patient transportation between bays and procedural rooms. Users are health care providers, which can use all

bed operations, patient and bystanders, which can use unlocked bed motion functions, and maintenance staff.

Only trained personnel or service technician should perform installation or maintenance on the bed.

Содержание OOK Snow FL36




























































































Результаты поиска

Содержание OOK Snow FL36

Отзывы:

Похожие инструкции для OOK Snow FL36

Бренды по названию

Популярные бренды

Umano Medical OOK Snow FL36, Руководство пользователя

Результаты поиска

Содержание OOK Snow FL36

Отзывы:

Похожие инструкции для OOK Snow FL36

Бренды по названию

Популярные бренды