Umano Medical OOK Snow FL36 Скачать руководство пользователя страница 89

Страница: 89 / 91

WARRANTY

The

Umano Medical

beds are designed for a 15-year service life under normal use, conditions, and

with periodic maintenance as recommended in Maintenance Manual.

Shipment receipt

The purchaser should examine the shipment upon receipt.

Umano Medical

must be notified by the

purchaser within 30 days of invoice of any short shipment, or any order-mistake.

Apparent shipment damage must be noted on delivery receipt and notified immediately to

Umano Medical

A claim in the amount of replacement cost will be initiated with the carrier for the

damages incurred. If any damage is found, the purchaser must notify

Umano Medical

within 15 days

of shipment receipt.

Product return

Merchandise cannot be returned without approval from

Umano Medical

An authorization number

will be provided which must be printed on the packaging of the returned merchandise. Modified or

discontinued products not subject to return.

Limited warranty

Umano Medical

warrants to the original purchaser that the products shall be free structural defects

in material and workmanship for a determined period after date of delivery; refer to the purchase

documentation for information about the available warranty time periods

Umano Medical

’

s obligation

under this warranty is expressly limited to supplying replacement parts and/or service for, or replacing,

at its option, any product that is, in the sole discretion of

Umano Medical

, found to be defective. In

addition,

Umano Medical

warrants for life to the original purchaser that the welds on its products will

be free from structural defects.

Any repair using non-authorized or non-original parts and any product alteration or modification will

void this warranty.

Parts and service

Original service parts are available for the lifetime of the product. Contact

Umano Medical

at:

Umano Medical Inc.

230 boulevard Nilus-Leclerc, L’Islet QC G0R 2C0 CANADA

T: (418) 247-3986

T: (844) 409-4030

[email protected]

Содержание OOK Snow FL36




























































































Результаты поиска

Содержание OOK Snow FL36

Отзывы:

Похожие инструкции для OOK Snow FL36

Бренды по названию

Популярные бренды

Umano Medical OOK Snow FL36, Руководство пользователя

Результаты поиска

Содержание OOK Snow FL36

Отзывы:

Похожие инструкции для OOK Snow FL36

Бренды по названию

Популярные бренды