Ulvac UK-2, Инструкция по эксплуатации

Страница: 18 / 48

Auto Regeneration Controller Model UK-2 Instruction Manual
6
ULVAC CRYOGENICS INCORPORATED
3.2 Rear Panel Description
Table 3-2 Part Names and Descriptions
（
Rear Panel
）
Table 3-2 Part Names and Descriptions
（
Rear Panel
）
No. No. Name Name Description Description
①
SOURCE POWER Main circuit protector of UK-2.
（ 5A ）
② HEATER POWER Circuit protector of BAND HEATER. (15A)
③ SOURCE INPUT
Power input of UK-2. AC100 〜 220V±10%
(Power input must be AC100V ±10% when using INNER HEATER)
To connect our INNER HEATER (1st, 2nd HEATER), always input
AC100V to the SOURCE INPUT or it may result in breakage of the
HEATER.
（ SOURCE INPUT double as INNER HEATER output power source
and the capacity of the INNER HEATER is AC100V.
）
④
BAND HEATER
BAND HEATER input and output (AC200 〜 220V±10% MAX15A).
⑤
SENSOR INPUT 1ST TEMP and 2ND TEMP
，
PIRANI GAUGE input.
⑥
ATM DC24V output (For MBS-C, PIRANI GAUGE input power), ATM input.
⑦
SYSTEM I/F I/F for remote operation from the equipment.
⑧
COMP I/F I/F for the Compressor.
⑨
VALVE N2 IN/OUT VALVE, ROUGH VALVE control output.
⑩
HEATER
Power output of INNER HEATER.
(Output the same voltage as it has input to SOURCE INPUT.)
⑪
SW Function choosing Dip SW
（
See section.4
）
１３ １２ １１ １０
９ ８ ７
６ ５
４ ３ ２ １
910 1 2 34 5 67 8
HEATER POWER SOURCE POWER
HEATER
S
R
N/C
V
U
N/C
N/C
N/C
RS I/F
BAND
HEAT
ER
A
C
220
V
15A
MAX
SW ATM
ID
VALVE COMP I/F
SENSOR INPUT
SYSTEM I/F
SOURCE INPUT
CAUTION