Ulvac GLD-137CC, Инструкция по эксплуатации

Страница: 49 / 54

Date Prepared: May 19, 2015
1KE
3/7
6. Accidental Release Measures
Personal Precautions, Protective
Equipment and Emergency Procedures
If skin or eye contact is possible, wear protective equipment. If mist
is produced, wear respiratory protective equipment to avoid
inhalation.
Environmental Precautions Take up as much as possible to avoid soil contamination and water
pollution.
Avoid release to the environment.
Collection/Neutralization
and Methods/Materials for Containment
Eliminate the source of ignition of the surrounding.
In the case of a large amount: Dike ahead of liquid spill area to
minimize migration and then sweep into an empty container for
disposal in a safe place. After disposal, wash away with plenty of
water. In doing so, take care to prevent the high concentration of
wastes from entering public watercourses such as rivers.
In the case of a small amount: Take up into an empty container by
absorbing the spill with earth and sand or rags, and furthermore sop
up with rags thoroughly.
Prevention of Secondary Hazards Remove all the ignition sources immediately. (Do not smoke nearby
and keep away from sparks and flames.)
Report to the related organs for help.
------------------------------------------------------------------------------------------------------------------------------------------------
7. Handling and Storage
Handling:
Technical Measures
Before repairing machinery with remnant oils on, remove them
thoroughly in a safe place. Take precautionary measures against
static discharge and wear electro conductive clothing and shoes.
As vapors released from petroleum products are heavier than air,
they are liable to stagnate.
Due to it, attention should be paid to ventilation and fire.
Handle at room temperatures, paying attention to moisture and to
impurities not to mix with.
If skin or eye contact is possible, wear protective equipment. If mist
is produced, wear respiratory protective equipment to avoid
inhalation.
Use a pump and the like to take out of container.
Do not suck through a tube.
Do not weld, heat, hole, and cut off the container. Residues may
ignite involving explosion.
Local Exhaust Ventilation/
Full Ventilation System
Refer to ‘8. Exposure Controls/Personal Protection’.
Avoiding Contact Refer to ’10. Stability and Reactivity’.