ULTRASTOR ULTRA 12F24, Руководство по установке

Страница: 41 / 52

APPENDIX F
3. Delete all *.RC@ and FDISK.COM from the "Installation" diskette to
make space for the UltraStor device driver DISK01.SYS.
4. Copy OS2_1.2\DISK01.sys from UltraStor’s OS/2 ISA disk device driver
diskette to the OS/2 "inst all" diskette.
5. Boot up the system with the modified "Installation" diskette in drive A.
6. Proceed with the normal OS/2 installation by inserting operating system
diskettes 1, 2, 3, 4, and 5, and stop when asked to insert the "Installation"
diskette.
7. Prior to inserting the "Installation" diskette, delete FDISK.COM from the
installation diskette, restore all the *.RC@ from the temporary diskette to
the installation diskette, and insert the "Installation" diskette to complete
the installation.
8. After completing the OS/2 installation, you may want to restore the
"Installation" diskette by deleting disk01.sys and restoring all the *.RC@
and FDISK.COM from the temporary diskette. (Please refer to OS/2
installation guide.)
Configuring LAN Manager 2.0 with Disk Mirroring/Duplexing
OS/2 Installation
Follow the previously described steps to install OS/2 except :
1. In "Preparing the Fixed Disk" menu, select "Specify your own partition", if
you plan to use the disk duplexing function, and enter the desired primary
partition size. If there are only two hard disk drives in the system, if you
choose "Accept predefined partition" or choose the maximum size for the
primary partition, the disk mirroring setup will not be successful since a
single boot partition will be created and boot partition cannot be mirrored
under LAN Manager 2.0.
Reference Manual Page F-3
NOTE
LAN Manager only works with OS/2 version 1.21 or later.