ULTRASTOR ULTRA 12F24, Руководство по установке

Страница: 23 / 52

APPENDIX A
Mapping Options for Drives Under Various Operating Systems
1) Select the corresponding drive choice (A, B, C, D, E) based on:
CYL=No. of cylinder SECT = No. of sector CAP =capacity of the hard disk
NOTE: It is not necessary to do low level formatting when the mapping option is
changed; however, the FDISK and high level FORMAT are required. If the 1 spare/trk
option is changed, low level format must be performed.
2) Select the operating system and choose the mapping options in the same column
under drive choice.
DOS 3.3 or Above
A B C D E
1 spare/trk No No No No No
sect map No 63 No 63 63
track map No No ≤1.2GB ≤1.2GB >1.2GB
1024 map No No No No No
OS/2 1.1, 1.2, 1.3:
A B C D E
1 spare/trk No No No No No
sect map No 63 63 63 63
track map No No No No No
1024 trunc No No Yes Yes Yes
Without UltraStor OS/2 Device Driver
(Max capacity 528MB)
A B C D E
1 spare/trk No No No No No
sect map No 63 No 63 63
track map No No ≤1.2GB ≤1.2GB >1.2GB
1024 trunc No No No No No
With UltraStor OS/2 Device Driver
(To break 528MB Limitation)
Reference Manual Page A-1
A = CYL<1024, SECT<63, CAP<528MB
B = CYL>1024, SECT<63, CAP<528MB
C = CYL>1024, SECT<63, CAP>528MB (≤1.2GB)
D = CYL>1024, SECT>63, CAP>528MB (≤1.2GB)
E = CYL>1024, SECT>63, CAP>1.2GB