6
STANDARD MODULES:
A.
PLUG-IN MODULES
TRISONIC
TM
SCANNING MODULE
This module is utilized to receive air-borne ultrasound such as the ultrasounds emitted by pressure/vacuum
leaks and electrical discharges. There are four prongs at the rear of the module. For placement, align the
prongs with the four corresponding jacks in the front end of the pistol housing and plug in. The Trisonic
TM
Scanning Module has a phased array of three piezoelectric transducers to pick up the airborne ultrasound.
This phased array focuses the ultrasound on one "hot spot" for directionality and effectively intensifies the
signal so that minute ultrasonic emissions can be detected.
:
STETHOSCOPE (CONTACT) MODULE
This is the module with the metal rod. This rod is utilized as a "waveguide" in that it is sensitive to
ultrasound that is generated internally such as within a pipe, bearing housing or steam trap. Once stimulated
by ultrasound, it transfers the signal to a piezoelectric transducer located directly in the module housing.
The module is shielded to provide protection from stray RF waves that have a tendency to effect electronic
receiving and measurement. . It is equipped with low noise amplification to allow for a clear, intelligible
signal to be received and interpreted. For placement align the four prongs on the back with the
corresponding receptacles in the front of the pistol and plug in.
:
A cone shaped scanning module that increases the detection distance above standard scanning modules.
The LRM-15 is ideal for high voltage inspection and for locating leaks at great distances.
LRM-(LONG RANGE MODULE):
Stethoscope (Contact) Module
Trisonic
TM
Scanning Module
Long Range Module
