12
The display screens in the Home Screen are:
dB(Main Screen)
This will display the test decibel and the test frequency
Setup
: This Icon will take you to the setup screen where you will configure the
instrument to meet your test requirements
dB/Temperature
: This test screen displays decibel, frequency and temperature.
ABCD (Valve Test Screen)
This screen will only be displayed if the
Valve or steam
application
has been selected in
Setup/Applications
. It will display the dB data for each of the four
(A,B,C,D) test points and the frequency.
Route
: View your test route. The route is displayed in sequential order. Each record
can be viewed by touching the test number.
Remove SD Card
: You must touch this icon
BEFORE
removing your SD Card.
II.
Before using the instrument, become familiar with the various features and modes of operation.
You may customize the instrument to meet your specific inspection demands. This is accomplished in the
A.
SET UP MODES & FEATURES:
SETUP Mode:
1.
Turn the instrument on
2.
Locate the Setup icon on the Home Screen
3.
Touch the Icon to enter the Setup mode.
1.
SETUP SCREEN ICONS:
NOTE: to scroll from one setup feature to the next, touch the UP/DOWN arrows on the right
of the screen. To select or change a setting, touch the selection box (or circle) on the screen.
Box will be highlighted. Then use the UP/DOWN arrows on the right to move within the
selected box. When through, touch the selected box to deselect.
a. “Preferences”:
Here you will be able to select:
