10
a.
NOTE: Be sure the SD card is inserted in the Ultraprobe 15,000 before turning on.
TURN OFF
1. Press the On/Off button
:
2. Touch the Off Box on the display screen
b.
SUSPEND
1. Press the On/Off button
: In place of turning the instrument on and off in between short intervals of use, or
to extend the use time on a battery (normally 4 hours of continuous use after a complete charge),
put the instrument on SUSPEND. To do this:
2. Touch the SUSPEND box on the display screen.
c.
RETURN TO OPERATION MODE:
1. Touch the display screen and display will re-open.
(cancel the SUSPEND mode) :
2.
The SD card is used to store all your inspection data and sounds. It will hold the test
information for transfer to a computer that has Ultratrend DMS V 5.0 or higher installed.
SD CARD AND SLOT:
When removing the SD Card while the
REMOVE SD CARD
Instrument is on , open the Home Screen and Select this icon. You will be
prompted when to turn the instrument off.
NOTE: Be sure the SD card is inserted in the Ultraprobe 15,000 before turning on
ALWAYS turn the Ultraprobe 15,000 OFF before removing the SD card!
3.
This has multiple functions. After the instrument has been turned on using the On/Off
Button (above), pull the trigger in while performing your tests. To hold a reading for
storage or review, release the trigger. The trigger Switch is also used to turn on the laser
pointer or the IR Thermometer when these features have been selected in the “Set-Up
Menu”.
TRIGGER SWITCH:
4.
All your inspection functions can be controlled by just touching an icon, arrow or data box.
TOUCH SCREEN DISPLAY:
a.
Select FFT (Spectra) display, Time Series display or dual display: Record and Play back
sounds.
SPECTRAL ANALYSIS SCREEN
