49
ELECTRICAL
To view Electrical Info, click the Sensitivity Dial until the cursor moves to the bottom
of the Display Panel until “Press ENTER For” is blinking. Spin to Electric Info and
press Enter.
To enter a test condition:
Spin to Test Results: the condition default is COR and will blink slowly. If it is
necessary to change:
Click with the Sensitivity Dial and the condition (COR) will blink rapidly.
Spin to select a condition indication. The choices are; COR, BAD, TRK, ARC, PD, NE,
MEC (Mechanical looseness)
To Set, Click the Sensitivity Dial (the condition will blink slowly)
Spin to Temperature should a Temperature entry be desired
Click on the Temperature setting (it will blink rapidly) For example, if you are looking
to enter a reading of 250; Spin to the left to select the value of “200” and to
the Right
to select the value of 50).
Click to set
Spin to Humidity
Click to enter
Spin to VOLTAGE
Click to enter and spin to the desired Voltage
Click to set
Spin to Component
Click to enter
Spin to desired Location
Click to set
Spin to desired Location
