26
To view previously stored information, click the Sensitivity Control Dial to the bottom
of the Display Panel until “PRESS ENTER FOR” is blinking and spin
to Storage Display.
Press Enter to view the stored data. To view information in other storage locations,
click the Sensitivity Control Dial until the storage number blinks. The storage number
in the Storage Display mode is located in the upper left corner. Spin the Sensitivity
Control Dial to the desired storage location.
If you wish to view all stored information during inspections, you may set the screen
to Storage Display.
1.
Click the Sensitivity Control Dial until “PRESS ENTER FOR” is blinking. 2. If
Storage
Display is not shown, spin until Storage Display is shown and blinking. 3. Press the
Yellow Enter button. The Display Screen will be split. All inspection data will be
displayed on the top half while the stored information will be displayed on the bottom
half of the Display Screen.
STORING ABCD INFORMATION
To Store information when the ABCD Function has been
set:
When Click ENTER for Store (A) is blinking, press
ENTER.
Then Click ENTER for Store (B) will then blink, press
ENTER.
Then Click ENTER for Store (C) will blink, press ENTER.
Then Click ENTER for Store (D) will blink, press ENTER.
The function will then shift to STORE DATA.
Press ENTER and all four dB levels will be stored at the selected Record Number.
