
14
NOTE:
This operation can only be performed when the instrument SHUTOFF mode is set at TIMED.
Snap Shot Method: If you know you are going to be in a situation where you won’t be able to read the
display panel, go into Setup Mode and spin to Display Mode (Menu 09). Select Snap Shot and return to
Operation Mode. This will hold your reading even while you continue to hold the trigger in. For a quick
grab, take a reading, press the trigger in to hold it. For an update or new reading, simply release and
press the trigger switch.
AUTO-SHUTDOWN BATTERY FEATURE
The Ultraprobe 10000 is equipped with an auto-shutdown feature, which enables the instrument to
provide accurate measurement throughout the effective battery charge. If the Ultraprobe 10000 goes into
the auto-
shutdown mode, a message in the Display Panel will read “RECHARGE BATTERY”, no sound will be
heard in the headphones and measurements will not be displayed on the display panel. To restore the
Ultraprobe 10000 to its’ normal operating mode, recharge the instrument using the BCH
-10L Battery
Charger (BCH-10L2 for 220 V operation). If the SD Card is installed, on power-down a prompt will appear
stating that it is “writing records’ to the card.
No previously stored data will be lost.
RESETTING THE ON BOARD COMPUTER
For security purposes, there is no reset switch on the instrument. Should it be necessary to reset the
instrument, enter SETUP Mode and spin to DEFAULT SETTINGS (Menu 12) and choose the YES prompt to
re-set to factory default settings.
WARNING:
Selecting Default Settings erases all records stored in the instrument.